A/V Connections
Setting up your A/V Connections
Before you can record from your external sources, you must tell the Music Center what devices you have attached. You do this with the A/V connections screen.
To set up your connections:
1.Press the Setup button on the remote control. The System Setup screen is displayed.
2.Use the navigation arrows to highlight A/V connections, and press the Select button.
3.From the Setup - A/V Connections screen, highlight audio & video connections and press Select.
4.On the Audio Input Selection screen, identify the devices you have attached to each Music Center input. Press the Select button repeatedly until your device appears. This is just a name for
your device...if there is not an exact match, pick one that is similar. If a connection is not used, select not used.
5.Highlight save and press Select.
Once you have set up your A/V connections, a group will appear in your guide called External. This lists all of the external devices you have attached to your Music Center.
| IPAQ MUSIC |