Chapter 2

•Gateway

•Link Speed: Automatic, 10–Full,10–Half,100–Full,100–Half

•Type: DCHP or Static

•Hostname

See also

•“HP Scanner Tools Utility” on page 22

•“Network settings” on page 23

•“Embedded Web Server” on page 25

Change network setup type

Use the Network Setup menu on the control panel LCD Network menu to change the network setup type for the scanner.

TIP: For example, if you want to ensure that the IP address remains static, set Automatic to Off and specify the IP address in the IP Address field.

1.From the Network Setup menu, use to select Automatic, and then press OK.

2.Use to select On or Off, and then press OK.

NOTE: Setting Automatic to Off enables two additional network options: Set Link Speed and IP Address.

See also

•“Set the link speed” on page 24

•“Change the IP address” on page 24

Set the link speed

Use the Set Link Speed menu on the control panel LCD Network menu to change link speed for the networked scanner.

1.From the Network Setup menu, use to select Set Link Speed, and then press OK.

2.Use to select the link speed (Automatic (default), 10–Full, 10–Half, 100–Full, 100–Half), and then press OK.

Change the IP address

Use the IP Address menu on the control panel LCD Network menu to change the IP address for the networked scanner.

NOTE: Changes to the IP address are automatically transmitted to the computers which access the scanner.

24 Configure and manage the scanner on a network