CHAPTER 9 NOVELL NETWARE PRINTING
Assigning the Remote printer name and number using BRCONFIG
7.
a.Execute the BRCONFIG from the Windows® menu or insert the Brother Print / Fax server Software diskette in Drive A: of your PC and type:
A:BRCONFIG
b.Select the Brother Print / Fax server from the list of Print / Fax servers. When you get the message that the Print / Fax server is connected, press the ENTER key and type Where the default password "access" in response to the "#" prompt (the password will not echo) and then press the ENTER key again in response to the Enter Username> prompt. When you get the Local> prompt, type:
SET NETWARE NPRINTER nlm number ON service
SET NETWARE RESCAN EXIT
•Where nlm is the name of the PSERVER NLM on your file server.
•Number is the printer number (must match the printer number you selected during the PCONSOLE configuration in the previous steps).
•Service is the name of the service assigned by NetWare Print / Fax server name(where the default services are BRN_xxxxxx_P1 for the Brother printer, where "xxxxxx is the last six digits of the Ethernet address (MAC address)).
For example, to set up remote "Printer 3" for a Brother MFC with the Print / Fax server BRN_310107_P1 using the PSERVER NLM called BROTHER1PS, you would type:
SET NETWARE NPRINTER BROTHER1PS 3 ON BRN_310107_P1
SET NETWARE RESCAN EXIT
•You can also enter the remote printer name using your web browser by connecting to the Brother Print / Fax server using the TCP/IP protocol and selecting the NetWare protocol configuration.
The same services assigned by NetWare Print / Fax server name cannot be used for both queue server mode and remote printer mode.
You must now unload the PSERVER NLM from your NetWare file server console and then reload it in order for the changes to take effect.