CHAPTER 11 DLC PRINTING

Windows® 2000 Printer Setup

1.Log into Windows® 2000 with administrative privileges. From the Start menu, select Settings and then Printers.

2.Select Add Printer (If you have already installed a Brother printer driver, double click the printer driver that you wish to configure and then select Printers/Properties, select the Ports tab, Click on “Add Port” and continue from Step 6 (ignoring steps 11-14) about installing the correct driver).

3.Click Next.

4.Select Local Printer and make sure that “Automatically detect and install my Plug and Play printer” is not checked.

5.Click Next.

6.Select the “Create a new port:” option and highlight “Hewlett-Packard Network Port”.

7.Click Next.

8.A list of available Print / Fax server MAC addresses (Ethernet addresses) appears in the larger box under Card Address. Select the address of the desired Print / Fax server (you can see the Ethernet address on the printer configuration page).

You can find the node name and MAC address by printing out the printer configuration page. Refer to the NC-8100h Quick Network Setup Guide for information on how to print the configuration page on your Print / Fax server.

9.The selected Print / Fax server address will then appear in the smaller box under Card Address.

10.Type in any desired name for the port (the name must not be the name of an existing port or DOS device, such as LPT1) and click OK then on the Printer Ports screen, click Next.

11.Select the correct driver click Next.

12.Give a name to the printer and specify if you wish to be able to print from DOS application. Then click Next.

13.Specify the share name (if you are going to share the printer).

14.Enter the Location and Comment information and click Next until you see the “Completing the Add Printer Wizard” screen.

15.Click Finish.

11-3