CHAPTER 2 FRONT PANEL SETUP MENU

CHAPTER TWO

Front Panel2Setup Menu

LAN Main Setup Menu

The LAN menu selections allow you to setup the Brother MFC for your network and Internet Fax configuration. Press [Menu] then press the appropriate number for LAN, based on the selections displayed on your machine. After you have displayed the LAN Main Setup menu, there are five main selections: 1-Setup

TCP/IP, 2-Setup Internet, 3-Setup Mail RX, 4-Setup Mail TX, 5-Setup Relay and 6-Setup MISC. Proceed to the menu selection you wish to configure.

Please note that once you have specified a valid IP address for the machine, it is also possible to configure many aspects of the MFC using your favorite web browser. For added flexibility, the MFC is supplied with the BRAdmin Professional Windows® software, which also can be used to configure many aspects of the NC-8100h.

1-Setup TCP/IP

This menu has eight sections: 1-Boot Method, 2-IP Address, 3-Subnet Mask, 4- Gateway, 5-Host Name, 6-WINS Configuration and 7-WINS Server.

1-BOOT METHOD

1.Press the [Menu] button to display the configuration menu.

2.Select LAN.

3.Press [1] [1].

4.Press ! or " to select AUTO, STATIC, RARP, BOOTP or DHCP.

5.Press [Set] to accept the selection.

6.Press [Stop/Exit] to exit the configuration menu.

7.Now make sure that you power cycle the MFC.

2-1