HP nx6130 manual Removing the System Board Screws and Screw Locks

Removal and Replacement Procedures

3.Disconnect the serial connector cable 1 and the Bluetooth cable 2 from the system board.

4.Remove the T8M2.0×4.0 screw 3 that secures the system board to the base enclosure next to the RJ-11 connector.

5.Remove the two HM5.0×9.0 screw locks 4 on each side of the parallel connector.

6.Remove the two HM5.0×9.0 screw locks 5 on each side of the external monitor connectors.

Removing the System Board Screws and Screw Locks

6–52 Maintenance and Service Guide