HP nx6130 manual Removing the Hard Drive Frame and Connector

Removal and Replacement Procedures

8.Remove the two PM2.5×4.0 hard drive frame shoulder screws 1 from each side of the hard drive.

9.Remove the two PM2.5×4.0 hard drive frame screws 2 from each side of the hard drive.

10.Remove the two PM1.5×3.5 hard drive frame screws 3 from the front of the hard drive.

11.Lift the frame straight up 4 to remove if from the hard drive.

12.Remove the hard drive connector 5 from the hard drive.

Removing the Hard Drive Frame and Connector

Reverse the above procedure to install and reassemble the hard drive.

6–8 Maintenance and Service Guide