Removal and Replacement Procedures
6.Turn the computer
7.Open the computer as far as possible.
ÄCAUTION: Support the display assembly when removing the following screws. Failure to support the display assembly can result in damage to the display assembly and other computer components.
8.Disconnect the display cable 1 from the system board.
9.Remove the wireless antenna cables 2 from the clips in the top cover.
10.Remove the two Torx8 T8M2.5×9.0 screws 3 that secure the display assembly to the computer.
11.Lift the display assembly 4 straight up and remove it.
Removing the Display Assembly
Reverse the above procedure to reassemble and install the display assembly
Maintenance and Service Guide |
