Removal and Replacement Procedures
2.Remove the two Phillips PM2.5×4.0 screws 1 that secure the modem module to the system board.
3.Lift the front of the modem module 2 to disconnect it from the system board.
4.Disconnect the modem module cable 3 from the modem module.
5.Disconnect the modem cable 4 from the system board.
6.Remove the modem connector 5 from the clip in the base enclosure.
✎The modem module cable is included with the modem module spare part kit and is also available in the Cable Kit, spare part number
Removing the Modem Module and Cable
Reverse the above procedure to install the modem module.
Maintenance and Service Guide |