Removal and Replacement Procedures
2.Position the computer with the rear panel toward you.
3.Release the ZIF connector to which the USB/audio board cable is connected and disconnect the USB/audio board cable 1 from the system board.
4.Remove the Phillips PM2.0×3.0 screw 2 that secures the USB/audio board to the base enclosure.
5.Remove the cable from the clips 3 in the base enclosure.
6.Remove the USB/audio board 4.
7.Release the ZIF connector to which the USB/audio board cable is connected and disconnect the USB/audio board cable 5 USB/audio board.
Removing the USB/Audio Board
Reverse the above procedure to install the USB/audio board.
Maintenance and Service Guide |