Removal and Replacement Procedures

6.Turn the notebook right-side up with the rear panel facing you.

7.Release the ZIF connector 1 to which the TouchPad cable is attached and disconnect the TouchPad cable 2 from the system board.

8.Route the two antenna cables 3 out of the hole in the system board.

Disconnecting the TouchPad Cable and Routing the Wireless Antenna Cables

5–32

Maintenance and Service Guide

Page 121 Page 123
Page 122
Image 122
HP nx7000, X1000 manual Removal and Replacement Procedures
Page 121 Page 123
Top Page Image Contents