Table 3-3. Troubleshooting Suggestions

 

 

Repair Center:

Repair Center:

Symptom

Call Center: Suggestions

Likely Causes

Comments

 

 

 

 

To help determine likely causes of a problem, determine which replaceable modules are involved in the system function and what roles they play. See the figure on page 1-24 and the table on page 1-25.

Startup

Does not boot on

Check power source.

AC adapter

Check AC adapter.

AC or battery

Press and hold power button to turn

SDRAM module.

Remove all but one

 

SDRAM module and try

 

notebook off, and then press power

 

 

CPU module

again.

 

button to turn notebook on.

 

 

 

 

If the power status light

 

Unplug the AC adapter, remove the

Switchboard PCA

 

does not turn on,

 

battery and any PC cards, press the

 

 

Motherboard

reprogram the BIOS, and

 

reset button to turn notebook off, and

 

 

replace the top case,

 

then reconnect power and try again.

Display assembly

 

replace the motherboard.

 

Do not use touch pad while booting

Hard drive

If power status light turns

 

or resuming.

 

on but display remains

 

Remove all but one SDRAM module

 

off, try external monitor. If

 

 

monitor shows

 

and try again. Reinsert any other

 

 

 

successful boot, replace

 

SDRAM module and try again.

 

 

 

display assembly.

 

 

 

 

 

 

If monitor shows activity

 

 

 

but BIOS does not

 

 

 

complete, replace display

 

 

 

assembly. If monitor is

 

 

 

blank, replace

 

 

 

switchboard PCA,

 

 

 

replace motherboard.

 

 

 

If power status light and

 

 

 

display turn on, BIOS

 

 

 

completes, but OS does

 

 

 

not start from hard disk

 

 

 

or floppy drive, replace

 

 

 

CPU module, replace

 

 

 

motherboard. If OS starts

 

 

 

from floppy drive, reload

 

 

 

hard drive, replace hard

 

 

 

drive.

Beeps once, spins

Make sure at least one SDRAM

SDRAM module

 

hard disk, repeats,

module is installed.

 

 

but does not boot

 

 

 

Does not boot on battery,

Make sure battery is properly

Battery or contacts

 

but boots on AC

installed and fully charged. Check

Motherboard

 

 

battery level on battery LEDs.

 

 

 

 

 

Check battery contacts. If available,

 

 

 

try another battery.

 

 

Does not boot from

Make sure floppy disk is bootable.

Floppy disk or floppy drive

Make sure floppy drive is

floppy drive

Use BIOS Setup to check default

Motherboard.

installed and connected

 

correctly.

 

boot order.

 

 

 

 

 

 

 

 

Does not boot from CD in

Make sure CD is bootable.

CD/DVD drive

Make sure CD/DVD is

CD/DVD drive

Use BIOS Setup to check default

Motherboard

installed and connected

 

correctly.

 

boot order.

 

 

 

 

 

Restart notebook.

 

 

 

 

 

 

Sluggish startup or

Use Tools tab in disk’s Properties

Hard drive

 

shutdown

sheet to check hard disk. Use Disk

 

 

 

Defragmenter to optimize hard disk.

 

 

 

Delete temporary and unneeded

 

 

 

files.

 

 

3-8

Troubleshooting and Diagnostics

Service Manual