Message | Description |
02F7: | ServerBIOS2 test error: |
Failed |
|
device Address Conflict | Address conflict for the specified device |
Allocation Error for: device | Run ISA or EISA Configuration Utility to resolve a resource conflict for the specified device |
CD ROM Drive | |
Entering SETUP | Starting BIOS Setup |
Failing Bits: nnnn | Hex number nnnn is a map of the bits at the RAM address that failed the memory test Each |
| 1 (one) in the map indicates a failed bit See errors 230, 231, or 232 above for offset address |
| of the failure in System, Extended, or Shadow memory |
Fixed Disk n | Fixed disk n |
Invalid System Configuration | Problem with NVRAM (CMOS) data |
Data |
|
I/O device IRQ conflict | I/O device IRQ conflict error |
PS/2 Mouse Boot Summary | PS/2 mouse installed |
Screen: |
|
nnnn kB Extended RAM | Where nnnn is the amount of RAM in KB successfully tested |
Passed |
|
nnnn Cache SRAM Passed | Where nnnn is the amount of system cache in KB successfully tested |
nnnnKB Shadow RAM Passed Where nnnn is the amount of shadow RAM in KB successfully tested
nnnnKB System RAM Passed Where nnnn is the amount of system RAM in KB successfully tested
Operating system not found | Operating system cannot be located on drive A: or drive C: Enter BIOS Setup and see if the |
| hard disk and drive A: are properly identified |
|
|
Parity Check 1 nnnn | Parity error found in the system bus BIOS attempts to locate the address and display it on |
| the screen Parity is a method for checking errors in binary data A parity error indicates that |
| data has been corrupted |
Parity Check 2 nnnn | Parity error found in the I/O bus BIOS attempts to locate the address and display it on the |
| screen |
Press <F1> to resume, <F2> to | Displayed after any recoverable error message Press <F1> to start the boot process or <F2> |
Setup, <F3> for previous | to enter BIOS Setup and change the settings Press <F3> to display the previous screen |
| (usually an initialization error of an Option ROM, such as an |
| follow the information shown on the screen |
Press <F2> to enter Setup | Optional message displayed during POST |
PS/2 Mouse | PS/2 mouse identified |
System BIOS shadowed | System BIOS copied to shadow RAM |
UMB upper limit segment | Displays the address nnnn of the upper limit of Upper Memory Blocks (UMB), indicating |
address: nnnn | released segments of the BIOS that can be reclaimed by a virtual memory manager |
Video BIOS shadowed | Video BIOS copied to shadow RAM |
Service Manual | Troubleshooting and Diagnostics |