3.The pointing devices are not active in BIOS Setup, so you will need to use the keyboard to navigate:
!Press the LEFT and RIGHT arrow keys to move among menus
!Press the UP and DOWN arrow keys to move among parameters in a menu
!Press F5 or F6 to move through values for the current parameter, or press enter to change a setting
4.After you select the options you want, press F10 or use the Exit menu to exit BIOS Setup
If the settings cause a conflict between devices during reboot, the system prompts you to run BIOS Setup, and marks the conflicting settings
NOTE: The listings in the following table are for the initial BIOS release and might differ somewhat for other models
Table
All notebook models: Introduced with BIOS version KE0104 (Fall 2002)
Main Menu | Description | Default |
BIOS Revision | Shows the current BIOS version | Detected |
|
| automatically |
System Time | Sets the time using |
|
System Date | Sets the date using dd/mm/yy format (except English, which uses |
|
| mm/dd/yy format) |
|
Language | Sets the language for BIOS Setup | Detected |
|
| automatically |
Internal Hard Disk | Sets the hard disk drive type and various parameters | Detected |
|
| automatically |
Extended Memory | Shows the extended memory size | Detected |
|
| automatically |
CPU Serial Number | For a Pentium processor with a serial number, makes the serial | Disabled |
| number available to software |
|
Serial Number | Displays the serial number as shown on the back of the notebook | Detected |
|
| automatically |
PC ID | Displays the PC ID String stored in the reserved part of RAM |
|
Service ID | Displays an identifier used for repair service | Detected |
|
| automatically |
UUID | Displays the value of the | Detected |
| 32 hex characters | automatically |
MAC Address | Displays the MAC network address of the internal (wired) LAN, if | Detected |
| present | automatically |
Service Manual |