CAUTION: Wireless Models
Be careful when removing and attaching antenna cables. Damage to cables or connectors can degrade performance.
3.Wireless models only: Remove the Mini PCI door, and then unplug the 2 antenna cables from the Mini PCI card. Do not remove the Mini PCI card at this time.
4.Remove the two M2.0×4.0mm screws that secure the PCMCIA assembly to the bottom case.
5.Remove the 4 screws that secure the hard disk drive guide to the bottom case.
NOTE: The 4 screws that secure the hard disk drive guide are 2 different sizes. The screw in the upper left corner is a M2.5×6.0mm screw. The remaining 3 screws are M2.0×4.0mm screws. Make sure these screws are installed in the correct locations when reinstalling the hard disk drive guide.
6.Remove the hard disk drive guide.
Figure
Service Manual | Removal and Replacement |