Replacing Small Parts

The user can replace the following small parts.

 

Table 2-4. Replacing Small Parts

 

 

Part

Replacement Procedure

Rubber screw plugs, display

Insert a small flat-blade screwdriver under the rubber screw plug and pry it loose. To replace,

(on display bezel)

firmly press the adhesive side of the screw plug into the recess.

Door, Mini PCI

On the bottom of the notebook, loosen the screws that secure the Mini PCI door to the

 

bottom case, and then remove the door.

Door, memory

On the bottom of the notebook, loosen the screws that secure the SDRAM module door to

 

the bottom case, and then remove the door.

Feet, rubber

Insert a small flat-blade screwdriver under the foot and pry it loose. To replace, firmly press

(on bottom of notebook)

the adhesive side of the foot into the recess.

Rubber cover, docking port

Grasp the rubber docking port cover with your fingers and gently remove it. To replace, firmly

(ze4500 only)

press the docking port cover into the opening in the bottom case.

Cover, modem port

Insert a small flat-blade screwdriver at the top of the cover and gently pry it loose. To

 

replace, insert the cover into the modem port opening.

2-12 Removal and Replacement

Service Manual