3.Turn the notebook bottom side up with the front facing forward.

4.Remove the following M2.5×4.0mm screws:

•One from the battery bay

•One from the hard disk drive bay

5.Remove the remaining 14 M2.5×6.0mm screws.

6.Turn the notebook top side up with the rear panel facing forward.

7.Remove the two M2.5×4.0mm screws from the rear panel.

8.Remove the two M2.5×6.0mm screws from the top case.

9.Lift the top case off of the notebook and then disconnect the touch pad cable from the motherboard.

Figure 2-18. Removing the Top Case

HP Pavilion ze4x00, HP nx9005 and nx9000,

Compaq Evo Notebook N1050v and N1010v, and

Compaq Presario 2100 and 1100 Models

Service Manual

Removal and Replacement

2-27