HP POD 20c capacities
HP POD 20c capacity limitations
The capacity limitations for the HP POD 20c are separated into two categories: electrical power and mechanical cooling capacities. Both of these categories are interdependent and must be considered in conjunction with the overall customer requirements.
Electrical power capacities (critical IT power)
The electrical system of the HP POD 20c contains two main feeds, A and B, that are each rated at 320 A
Mechanical cooling capacities
The HP POD 20c cooling system consists of 3 zones. Each zone includes 2 heat exchangers and 12 fans. Cooling capacities are based on:
•Chilled water inlet temperature of 15.6ºC (60ºF)
•Pure water cooling
•Chilled water flow rate of 454 lpm (120 gpm)
•Average air flow of 1700 cfm per rack
Overall system capacities
The HP POD 20c overall system capacities are provided in the following table. The customer must know the level of redundancy required for the application and its associated limiting factor.
Redundancy level | Electrical (kW) | Thermal (kW) | Limiting factor |
|
|
|
|
N | 263 – 288 | 300 | Electrical |
2N | 132 – 144 | 150 | Electrical |
The electrical limitation factors are described in "Electrical power capacities (critical IT power) (on page 7)."
HP POD 20c capacities 7
