To set the answer ring pattern via the embedded Web server
▲Click the Settings tab, click Fax in the left pane, click the Advanced
Set the fax error correction mode
Typically, the device monitors the signals on the phone line while it is sending or receiving a fax. If it detects an error signal during the transmission and the error- correction setting is on, the device can request that a portion of the fax be resent.
Turn off error correction only if you are having trouble sending or receiving a fax, and you want to accept the errors in the transmission. Turning off the setting might be useful when you are trying to send a fax to another country/region or receive a fax from another country/region, or if you are using a satellite phone connection.
To set the fax
•Embedded Web server (network connection): Open the embedded Web server, click the Settings tab, click Fax in the left pane, click the Advanced tab, select On or Off in the Error Correction Mode
•Control panel: Press Fax Menu, open the Advance Fax Setup menu, and then use the Error correction mode option.
Set the dial type
Use this procedure to set
NOTE: The
To set the dial type
•Embedded Web server (network connection): Open the embedded Web server, click the Settings tab, click Fax in the left pane, click the Basic tab, make a selection in the Tone or Pulse Dialing
•Control panel: Press Setup, press Basic Fax Setup, and then use the Tone or Pulse Dialing option.
Set the redial options
If the device was unable to send a fax because the receiving fax machine did not answer or was busy, the device attempts to redial based on the settings for the busy- redial and
•Busy redial: If this option is turned on, the device redials automatically if it receives a busy signal. The
•No answer redial: If this option is turned on, the device redials automatically if the receiving fax machine does not answer. The
Change fax settings | 81 |