Power management software | 30 |
Maintenance | 31 |
Removing the UPS front bezel | 31 |
Removing the ERM front bezel | 32 |
Replacing the UPS electronics module | 32 |
Replacing the UPS option card | 33 |
Replacing the batteries | 34 |
Important battery safety information | 34 |
Battery care and storage guidelines | 34 |
UPS battery replacement procedure | 35 |
Replacing the UPS | 35 |
Replacing the ERM | 36 |
Updating the UPS firmware | 37 |
Troubleshooting | 38 |
LED and audible alarm troubleshooting | 38 |
Battery condition | 39 |
Bypass is out of range | 39 |
General alarm condition | 40 |
Input voltage is out of range | 40 |
Insufficient warning of low batteries | 40 |
Internal UPS fault condition | 40 |
Low battery shutdowns | 41 |
Overload condition | 41 |
REPO condition | 41 |
Site wiring condition | 41 |
UPS does not provide the expected backup time | 41 |
UPS does not start | 42 |
UPS frequently switches between utility and battery power | 42 |
UPS is in | 42 |
UPS is on battery | 42 |
Utility power condition | 42 |
Specifications | 43 |
UPS physical specifications | 43 |
ERM physical specifications | 43 |
UPS input specifications | 43 |
UPS output specifications | 44 |
Power protection specifications | 44 |
Voltage specifications | 44 |
Output tolerance specifications | 45 |
Output feature specifications | 45 |
Battery specifications | 45 |
Battery runtime for NA/JPN model | 45 |
Battery runtime for INTL model | 45 |
Environmental specifications | 46 |
REPO port specifications | 46 |
Spares | 47 |
Ordering spares | 47 |
UPS spare parts list | 47 |
Hardware options | 48 |
Technical support | 49 |
Contents | 4 |