HP R717 2. Attach the Wrist Strap, 3. Install the Battery

2. Attach the Wrist Strap

Attach the wrist strap to the wrist strap mount on the side of the camera as shown.

3. Install the Battery

Your camera can use either a rechargeable HP Photosmart R07 Lithium Ion battery (L1812A/L1812B) or a disposable Duracell® CP1 battery.

1.Open the Battery/ Memory Card door on the bottom of the camera by sliding the door to the back of the camera.

2.Insert the battery in the larger slot as shown, and push it in until the latch catches.

3.Close the Battery/Memory card door by pushing the door down and then sliding the door toward the front of the camera until the door latches.

To remove the battery from the camera, first turn the camera off. Then open the Battery/Memory card door, release the battery latch, tilt the camera, and the battery will slide out of its slot.

Getting Started 13