Record out of sequence
An attempt was made to relocate a module not beginning at the first record of the module. Recompile the module and retry.
Resource number specification error
The RESN command to specify resource numbers occurred out of order in the command file or was specified incorrectly.
1)Check the format of the command: RESN,n.
2)Check that it follows the CLAS command.
3)Check that n is numeric and in the proper range.
SAM specification error
The size of SAM must be a positive integer, =<32767.
Segment RTAGn not found
Make sure that segments RTAG1, RTAG2, RTAG3, and RTAG4 have been properly RP'd.
Segmented program not allowed
Segmentation is not allowed during any portion of a system generation.
Select code error
The offending select code has already been assigned to an IFT. Select codes must be numeric and in the range 20B to 77B.
Shared program specification error
Shared program specification must be positive and nonzero.
Snap entry duplicate when truncated
All snap file symbols must be unique in their first 16 characters. Change one of the symbols, reassemble, and try again.
Snapshot file error
A read error occurred on the snap file that is created by the generator. Retry the generation.
Specified module not found
The module is not in the file specified by a RElocation, SEarch, or MSearch command. Ensure that the module exists and that the form of the offending command properly references it.
Class limit specification error
Check to ensure that the class limits are numeric.
(CLASS not included in this system, syntax check only)
The system module CLASS has not been included in this generation, so the class buffer limit command is not pertinent. The parameters are verified.
Symbol table overflow, size up
The generator requires a larger partition to relocate the modules. Use the system SZ command to accomplish this.
System CDS libraries specified for non%CDS system
The system generation does not include CDS capability, part of VC+ only. Specifying system CDS libraries has no effect, because LINK will not load any CDS programs using this snapshot file.
A6 Error Messages