HP RTEA manual Parallel Interface Card

*
*	48	HI–IB #3 controller	31B	36B
*	34	7974A/7980A streaming tape drive	31B	5
*	35	7974A/7980A streaming tape drive	31B	7
*
*		HP–IB #4
*		========

*Low speed peripheral / instrument bus.

*Maximum cable length of 2 meters per device.

* ========

*A maximum of two 256X printers are supported on one interface;

*no other devices are supported with them

*
*	91	HP–IB #4 controller	25B	36B
*	85	2608S,2563A,2566A line printer	25B	1
*	6	2932A line printer	25B	2
*	92	device #1	25B	3
*	93	device #2	25B	4
*	94	device #3	25B	5
*	95	device #4	25B	6
*

*248X INTEGRATED DISKS (Micro/1000 with 12022A controller)

*=========================================================

* 55,62		15MB hard disk	32B
* 59,60		20MB hard disk	32B
*	39	single–sided 3.5” flexible disk	32B
*	63	double–sided 3.5” flexible disk	32B
*
*		NETWORK LINKS (NS/1000 and IEEE802.3 LAN)
*		========================================
*
* 79,80		Telnet LU
* 81,82		NS/1000 LU mapping	37B
* 96		12076A 802.3 LAN card	37B
*
*		PARALLEL INTERFACE CARD
*		=======================
*	84	Parallel Interface card	35B
*
*		TERMINALS
*		=========
*

*Terminal configuration (NOTE: The 12005 is configured as system console

*LU 1. LUs may be swapped to designate another device as the new

*system console. You should have a system console device.)

*
*	1	12005	ASIC #1		20B
*	100	12005	ASIC	#2	21B
* 110–113		12100	A400	OBIO 4–channel MUX	77B

*211 slaved device(printer) port B

*	212	left CTU	port	B
*	213	right CTU	port	B
* 120–127		12040D 8–channel MUX		30B

*221 slaved device(printer) port 1

*	222	left CTU	port 1
*	223	right CTU	port 1
* 130–137		12040A/B/C 8–channel MUX		23B