*

*Source: 92077–17326 REV.6200 <950406.1028>

*Primary.ans– RTE–A Primary System Generation Answer File to make

*primary.sys(#92077–16954), primary.snp (#92077–16955) and primary.lst

*(#92077–17278).

*

************************************************************************

*

*

 

*

*

* This half of the primary answer file is used only for Primary

*

*

*

System generation. It is NOT to be used with a user system.

*

*

* To use this answer file as a sample for generating another

*

*

* system, delete the first half of this file, and continue with

*

*

*

the instructions on the second half.

*

*

*

 

*

************************************************************************

*This answer file is to be used in a PRIMARY memory–based system. There

*is nothing generated into LU 1. It is required that the startup program

*be LUCFG.RUN, which maps the I/O card which has VCP enabled to the correct

*select code, and the correct interface driver to LU 1. This generation

*requires:

*LU 1: ID100 at select code 20B (double–mapped if VCP port)

*LU 110: ID400 at select code 77B (double–mapped if VCP port)

*LU 120: ID800 at select code 30B (double–mapped if VCP port)

*LU 130: IDM00 at select code 23B (double–mapped if VCP port)

*

*Note that if mapping occurs, do not use the previous LU. (If 12100A is

*the VCP port, LU 110 should not be used, since there are now two LUs

*pointing to the same hardware.)

*

*$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$*

Page 253
Image 253
HP RTEA manual