Closing the Computer
Replacing the Computer Cover
1Place all cables inside of the computer case.
2Place the cover onto the computer about 2.5 centimeters (1 inch) back. Make sure the slots in the computer case align with the cover tabs.
3Slide the cover forward on the frame until it locks into place. Make sure the bottom of the cover lines up with the computer case.
4Align the screws on the computer cover with the holes on the back of the computer frame. Insert and then tighten the screws on the cover.
5Complete the procedure “After Closing the Computer” on page 7.
After Closing the Computer
To avoid injury and equipment damage, always follow this procedure in this order after closing the computer:
WARNING: To reduce the risk of electrical shock, fire, or damage to the equipment, do not plug telecommunications or telephone connectors into the Ethernet network interface connector.
1Reconnect the modem/telephone cable and all other attached cables, such as the keyboard, mouse, Ethernet, and monitor cables.
2Reconnect external devices, such as a printer.
3Reconnect the power cord.
4Turn on the computer and all peripherals, such as the monitor.
Upgrading and Servicing Guide 7
