Removing a PCI-E Card

1Prepare the computer and remove the computer cover. Complete the procedures “Opening the Computer” on page 2.

2Inside the computer, locate the PCI-E card slot on the motherboard.

3Make a note of any internal cables attached to the card, and then disconnect them.

4Remove the screw on the modem card bracket holder on the outside of the frame. Remove the bracket holder.

5While lifting the latch holding the card to the motherboard, hold the card at the top, and carefully pull the card straight out of the slot.

22Upgrading and Servicing Guide

Page 26
Image 26
HP S3905F manual Removing a PCI-E Card