Color
This sets the color of the photo that will be captured.
* Standard / Vivid / Sepia / B&W / Blue / Red / Green / Yellow / Purple
Saturation
This sets the saturation of the photo that will be captured. * High / Standard / Low
Metering
This sets the metering method for calculating the exposure.
* Center: | Averages the light metered from the entire frame, but gives greater |
| weight to the subject matter at the center. |
* Spot: | A very small portion of the center of the screen is measured to |
| calculate the correct exposure. |
* Average: | The exposure is measured all of the subject area. |
Capture Md.
This sets the recording method at the time of capturing photos.
* Single: | Captures one photo at a time. |
* Continuous: | Permits continuous capture of up to 3 photos. |
* AEB: | Permits 3 consecutive photos in the order of standard exposure, |
| underexposure and overexposure compensation. |
* Album Shot: | Creates an |
| image. |
* Burst: | Permits continuous photography while pressing and holding the |
| shutter button. As long as you hold the shutter button pressed, |
| images are captured until the memory capacity is exhausted. |
* Cont.flash: | Permits continuous capture of up to 3 photos with flash. |
* | Select a background by 1st shot, the image shown on display will |
| be transparent, then take the 2nd shot on the basis of 1st image. |
| Image of 1st shot is only a guiding tool, it won't be saved on SD |
| card. Normally this function is used when taking a portrait picture |
| and the background is selected by the model instead of the |
| photographer. |
* Coupl.shot: | Uses separate areas to combine two shots. You can include |
| yourself in the photo. |
* Burst 30fps: | Permits continuous capture of up to 30 photos in the resolution |
| 640 x480 within 1 second. |
* Interval capture: | Captures continuous photos at a preselected time interval. |
Digi. Zoom
This sets whether or not to use digital zoom at the time of photography.
