HP s520 manual Taking a Panoramic Pictures, Setting the Lomo, EN-19

Taking a Panoramic Pictures

Pictures are manually shot, and the camera automatically combines pictures in the camera.

1.	Press the MODE button, and set the camera
		00214
	mode to [ ], and press the SET button.
2.	Select [Panorama Video] with the 4-way navigation
	control, and press the SET button.
3.	Press the shutter button down fully.

4.Horizontally move your camera to select the photographic direction, meanwhile the camera

begins to recording. SCN

5.Press the shutter button again to stop recording when the status bar move to the end. And the pictures are automatically combined.

„You can press the shutter button anytime to stop recording. And the pictures are

automatically combined.

„Panoramic pictures shooting may not be available in the following situations.

a.When shooting has not finished after a certain period of time.

b.When the camera movement speed is too fast.

c.When the camera is not straight relative to the panorama direction.

Setting the LOMO

Creates a lomo-like effect by adding over saturated colors, dark corners, and so on.

1.Press the MODE button, and set the camera mode to [ ], and press the SET button.

2.Select [LOMO] with the 4-way navigation control, and press the SET button.

3.Press the left side of the navigation control to select the desired option item

with the left or right side of the 4-way navigation control and press the SET button.

„LOMO 1: Creates a typical LOMO effect.

„LOMO 2: Creates a retro LOMO effect (more sepia tone).

„LOMO 3: Creates a retro LOMO effect (greener tone).

„LOMO 4: Creates a vivid LOMO effect.

4.Press the down side of the 4-way navigation control to exit.

EN-19