Using the Channel Strength option
1With the Antenna set (refer to “Setting the antenna using the Air/Cable option” on page 52 in the previous topic), view the air digital channel on the TV.
2Press Setup on the remote control, and select Channel Strength in the Setup/Antenna Setup
– Digital menu. Press OK.
3Move or adjust the direction of the air digital antenna until you obtain the maximum signal strength. Press OK.
Using Parental CTRL
This option defines settings for parental control, including setting the secret number (Secret No.); refer to “Using Parental Controls” on page 56.
Setting Input Skip
This option sets the TV to skip the HDMI connectors (Input 4 or MediaSmart) when selecting the input source.
Setting Position
Use this Setup menu option to position the image on the screen by setting horizontal and vertical values. Settings depend on the input source; this option is for AV inputs only. Select (view) the input source before selecting the menu option and adjusting the image position.
Setting Input Label
This option selects a name (from a list) for the input source. You cannot change the TV label.
Setting Picture Flip
This Setup option sets the orientation of the picture. Select (view) the input prior to setting the Picture Flip mode.
Picture Flip mode | Example |
Standard (normal image)
ABC
Mirror (mirror image)
ABC
Upside Down (upside down image)
ABC
Rotate (rotated image)
ABC
Setting Standby Mode
This option sets the TV mode for standby.
Standby Mode may be set to Mode 1, which starts the TV quickly from standby, or to Mode 2, which conserves energy while on standby.
Setting Language
This option sets the OSD menu language; select English, French, or Spanish.
Changing the TV Settings
Changing the TV Settings 53