Startup symptom |
| Remedy (continued) | |
|
|
|
|
The color is strange, faded, or |
| ■ Adjust the picture tone. | |
misaligned. |
| ■ Is the room too bright? The picture may look dark in a room that is | |
|
|
| too bright. |
|
| ■ Check the input signal setting. | |
|
| ■ If watching a component device, make sure the red, blue, and green | |
|
|
| cables are fully inserted into the proper connectors on both ends. |
|
|
|
|
The power suddenly turned off. |
| ■ Is the sleep timer set? | |
|
| ■ Check the power control settings. | |
|
| ■ The unit’s internal temperature has increased. Remove any objects | |
|
|
| blocking the vent, or clean the vent. |
|
|
|
|
The TV turned itself off and then on. |
| The TV sensed an internal communication error and turned off to reset | |
|
| itself. | |
|
|
|
|
Viewing questions |
|
| |
|
|
| |
Viewing symptom |
| Remedy | |
|
|
| |
I get a poor picture with video signal |
| Check the following: Improper control setting. Local interference. | |
input. |
| Cable interconnections. Adjust picture control as needed. Try | |
|
|
| another location for the TV. Be sure that all connections are secure. |
|
| ||
There is no picture or a black screen, and | ■ Press the Source button on the remote control, and confirm the | ||
I have an external device controlling the |
| source is selected. | |
TV. |
| ■ Verify that the external device power is turned on. | |
|
|
| ■ Check to see whether the source component is connected. |
|
|
| ■ Check the power management function. Is it in standby mode? |
|
|
| ■ Connect the source to the TV. Operate the external device. |
|
|
| |
The picture, with a component input |
| ■ Check to make sure each cable is plugged into the correct color- | |
source connected, is too red, blue, or |
| coded connector on the TV conncectors and input source | |
green. |
| connectors. | |
|
|
| ■ Make sure the cables are plugged in all the way. |
|
|
| |
I press Media but nothing happens. |
| ■ Is TV the selected device on the remote control? | |
|
|
| ■ Are the MediaSmart A and B cables loose or disconnected? |
|
|
| Make sure both ends are securely inserted. (See “Connecting |
|
|
| MediaSmart cables” on page 8.) |
|
|
|
|