outgoingSnmpTrapVersion=v2

5.Return to the Advanced page (Options > Storage Essentials > Manage Product Health. Then, click Advanced in the Disk Space tree).

6.Paste the copied text into the Custom Properties field. How you paste the text depends on your Web browser.

7.Make sure the property is not commented out by removing the hash (#) symbol in front of the property.

8.When you are done, click Save.

9.Restart the service for the management server for your changes to take effect.

While AppStorManager is restarting, users are not able to access the management server. The AppStorManager service must be running for the management server to monitor elements.

Setting Up E-mail Notification

The management server provides e-mail notification for reports and policies. For example, you can set up the management server to notify you by e-mail when the amount of free space on a host becomes too low.

You must assign an SMTP server from which the management server can send its e-mail notifications.

To configure e-mail notification:

1.Click Options > Storage Essentials > Email Settings in HP Systems Insight Manager.

2.(Required) Select Enabled to enable e-mail notification.

3.(Required) In the Name field, type the DNS name or the IP address of the Simple Mail Transfer Protocol (SMTP) server you want to use to send the e-mail notification.

4.(Required) In the Port field, type the port of the SMTP server you want to use to send the e-mail notification.

5.In the User Name field, enter a user name for the SMTP server.

6.In the Password field, enter a password for the SMTP server.

7.In the Verify Password field, re-type the password you entered previously.

8.(Required) In the Sender field, type the e-mail address of the sender. This address is displayed in the From field in the e-mail.

9.If you want the replies to go to an e-mail address other than the e-mail address specified in the Sender field, type the e-mail address you want to receive replies in the Reply to field.

10.Click the Save button.

IMPORTANT: You should try sending a test e-mail.

To send a test e-mail:

1.In the To field, type an e-mail address.

The software verifies the address entered has a correct form.

154 Configuring the Management Server