Table 31
Task | To Perform Task, | |
|
| |
1Create a zone alias | A zone alias with a blue folder under the fabric node. | |
|
| |
1Delete a zone alias | A zone alias under the Zone Aliases node. | |
|
| |
1Modify a zone alias |
| |
|
| |
1Show zone alias |
| |
details |
| |
|
| |
Provision Storage Pool | A storage system under the Storage System LUN Access | |
| node. | |
Provision Volume | ||
| ||
|
| |
Provision Host Security |
| |
Groups |
| |
|
| |
|
|
1When McDATA and Connectrix switches are discovered through a proxy by SNMP, you cannot view or perform any provisioning operations for those switches.
2Only these options are accessible when McDATA and Connectrix switches are discovered by a switch IP address directly through SNMP. This setting provides view only access to the active zone set and its members. You cannot create, modify, and/or delete zone sets or its members.
3The delete zone set option is disabled for active zone sets.
Viewing Storage ElementsSystem Manager has a wide range of features to help you in viewing your storage elements in the topology. For example, you can filter fabrics, arrange elements in the topology, and search for elements in the topology. You can even view the status of elements in the topology and find the impact of removing an element.
See the following topics in this section for more information.
•”Adding a Virtual Application” on page 238
•”Adding Information for “Discovered” Hosts” on page 239
238 Viewing Element Topology and Properties