Battery
Component | Spare part number |
|
|
Battery, | |
|
|
Before replacing the battery, follow these steps:
1.Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect the power from the computer by unplugging the power cord from the computer.
3.Disconnect all external devices from the computer.
4.Remove the keyboard/top cover (see Keyboard/top cover on page 19).
WARNING! To reduce potential safety issues, use only the battery provided with the computer, a replacement battery provided by HP, or a compatible battery purchased from HP.
CAUTION: Removing a battery that is the sole power source for the computer can cause loss of information. To prevent loss of information, save your work or shut down the computer through Windows before removing the battery.
Remove the battery:
1.Remove the six Phillips PM1.9×2.8 screws (1) that secure the battery to the base enclosure.
2.Detach the USB board cable (2) from the battery. (The USB board cable battery is attached to the battery with
3.Lift the front edge of the battery (3) until it rests at an angle.
4.Remove the battery (4) by sliding it up and forward at an angle.
5.Remove the battery.
Battery 31
