HP TippingPoint Next Generation Firewall manual Indication for Celsius

Table 3-7 health Attributes

Attribute	Description		Type	Access	Range
health.port-health	Attribute returning Port Statistics of the SMS.		String	read-only
	This information corresponds to the Ports
	Statistics table on the Port Health screen (SMS
	Health) in the UI with all 12 numbers printed in
	a single line. The six numbers are for the
	primary port and the second six numbers are
	for the secondary port. Each set of numbers
	corresponds to the following table headings:
	•	total input bytes
	•	total output bytes
	•	total input discards
	•	total output discards
	•	total input errors
	•	total output errors
health.swapInfo	Swap memory statistics.		String	read-only	0-128
	•	total
	•	used
	•	free
health.swapIo	Swap I/O statistics.		String	read-only	0-128
	•	blocks-read
	•	blocks-written
health.sys-valid	Attribute reporting the status of the SMS server		String	read-only	1-32
	application. If true, then the system is
	considered valid and fully operational, if false,
	the system should be restarted, and other
	corrective steps taken.
health.temperature	Attribute returning the temperature of the SMS		String	read-only	1-3
	(in degrees Celsius). This information
	corresponds to the SMS Health Statistics table
	in the UI.
	NOTE: The number is displayed with no
	indication for Celsius.
health.tmc-valid	Attribute reporting the status of the			read-only
	communication paths to the TMC and each of
	the configured devices. The message will
	indicate the nature of the problem. Usually, the
	problem can be addressed by confirming that
	the network settings permit the SMS to
	communicate with
	https://tmc.tippingpoint.com, available
	through the internet. See also diags.
	If the SMS cannot establish a TMC connection,
	see error messages in the SMS User Guide.

Security Management System CLI Reference 27