HP TippingPoint Next Generation Firewall Attrib used to remove an Snmp trap String Write-only

Table 3-20 snmp-trap Attributes

Attribute	Description	Type	Access	Range
snmp.trap-auth-proto	Attrib used to specifiy the authentication key	String	read-write
	for an SNMP trap destination. The IP address
	must be specified. The SNMP version is
	optional and can be specified when
	separated by a comma.
	Valid protocol values are: None, MD5, and
	SHA.
	Examples:
	set snmp.trap-auth-proto?1.1.1.1=MD5
	set snmp.trap-auth-proto?1.1.1.1,v3=
	MD5
snmp.trap-community	Attrib used to specifiy the community string	String	read-write
	for an SNMP trap destination. The IP address
	must be specified. The SNMP version is
	optional and can be specified when
	separated by a comma.
	Examples:
	set snmp.trap-community?1.1.1.1=
	public
	set snmp.trap-community?1.1.1.1,v2=
	public
snmp.trap-del	Attrib used to remove an SNMP trap	String	write-only
	destination. The IP address must be specified.
	The SNMP version is optional and can be
	specified when separated by a comma.
	Examples:
	set snmp.trap-del=1.1.1.1
	set snmp.trap-del=1.1.1.1,v3
snmp.trap-engine	Attrib used to specify the engine ID for an	String	read-write
	SNMP trap destination. The IP address must
	be specified. The SNMP version is optional
	and can be specified when separated by a
	comma.
	Examples:
	set snmp.trap-engine?1.1.1.1=012345
	set snmp.trap-engine?1.1.1.1,v3=
	012345
snmp.trap-info	Attrib used to list the SNMP trap destination	String	read-only
	Example:
	get snmp.trap-info

Security Management System CLI Reference 41