HP tx2000 manual Performing a recovery, Recovering from the recovery discs

Performing a recovery

Recovery Manager software allows you to repair or restore the system if you experience system failure or instability. Recovery Manager works from recovery discs that you create or from a dedicated recovery partition on the hard drive.

NOTE: Windows has its own built-in repair features, such as System Restore and driver roll-back capabilities. If you have not already tried these features, try them before using Recovery Manager.

NOTE: Recovery Manager recovers only software that was preinstalled at the factory. Software not provided with this computer must be downloaded from the manufacturer's Web site or reinstalled from the disc provided by the manufacturer.

Recovering from the recovery discs

To restore the system from the recovery discs: 1. Back up all personal files.

2. Insert the first recovery disc into the optical drive and restart the computer.

3. Follow the on-screen instructions.

Recovering from the partition on the hard drive

You can perform a recovery from the partition on the hard drive from either the Start button or f11.

To restore the system from the partition, follow these steps:

1. Access Recovery Manager in either of the following ways:

●Select Start > All Programs > Recovery Manager > Recovery Manager. –or–

●Restart the computer and press f11 while the “Press <F11> for recovery” message is displayed on the screen. Then select Recovery Manager.

Recovery Manager opens.

2. Click Advanced Options.

3. Click System recovery, and then click Next.

4. Follow the on-screen instructions.

100 Chapter 8 Backup and recovery