Optical drive
NOTE: All optical drive spare part kits include an optical drive bezel.
Description | Spare part number |
|
|
DVD±RW and | |
|
|
DVD±RW and | |
|
|
Before removing the optical drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power cord.
4. Remove the battery (see Battery on page 36).
Remove the optical drive:
1. Position the computer with right side toward you.
2. Slide the optical drive release latch (1) toward you. (The optical drive is partially ejected from the optical drive bay.)
3. Remove the optical drive (2) from of the computer.
To install an optical drive, slide the optical drive into the optical drive bay until you hear a click.
40 Chapter 4 Removal and replacement procedures
