| System interrupt specifications | 80 |
| System I/O address specifications | 81 |
| System memory map specifications | 83 |
7 | Screw listing |
|
| Phillips PM3.0×3.0 screw | 84 |
| Phillips PM2.0×7.0 screw | 85 |
| Phillips PM2.0×4.0 screw | 87 |
| Phillips PM2.0×5.0 captive screw | 89 |
| Black Phillips PM2.0×3.0 screw | 90 |
| Phillips PM2.0×11.0 screw | 91 |
| Phillips PM2.5×6.0 screw | 92 |
| Silver Phillips PM2.0×3.0 screw | 93 |
8 | Backup and recovery |
|
| Recovering system information | 95 |
| Creating recovery discs | 95 |
| Backing up your information | 96 |
| When to back up | 96 |
| Backup suggestions | 97 |
| Using system restore points | 97 |
| When to create restore points | 97 |
| Create a system restore point | 97 |
| Restore to a previous date and time | 99 |
| Performing a recovery | 100 |
| Recovering from the recovery discs | 100 |
| Recovering from the partition on the hard drive | 100 |
9Connector pin assignments
101 | ||
101 | ||
External monitor | 102 | |
(modem) | 103 | |
(network) | 103 | |
104 | ||
Universal Serial Bus | 104 |
10 | Power cord set requirements |
|
| Requirements for all countries or regions | 105 |
| Requirements for specific countries or regions | 106 |
11 | Recycling |
|
vii