120CHAPTER 12: COMMAND LINE INTERFACE
64 bytes from 192.156.136.22: icmp_seq=0 ttl=248 time=195.2 ms
If the device is not accessible, or is not functioning correctly, a message similar to the following is displayed:
No answer from 192.156.136.22
Displaying IP You can display IP summary information for the Webcache using the Summary summary command on the IP menu.
InformationTo display the IP information, at the
protocol ip summary
The IP information for the Webcache is displayed.
An example of the IP information is shown below:
IP address: 196.168.100.1
Subnet mask: 255.255.255.0
Default router: 196.168.100.2
Host Name: webcache
Domain name: mycompany.com
DNS address: 196.168.100.3
Tracing IP Addresses The Trace Route feature allows you to display the network hops from the Webcache to a device on an IP network. This feature is useful for testing that the Webcache is installed and set up correctly, and that your network connections are working.
You can perform a trace route to other devices on your network using the traceRoute command on the IP menu.
1At the
protocol ip traceRoute
The following prompt is displayed:
Enter destination IP address:
2Enter the IP address of the device that you want to trace.
The Webcache sends a trace route request to the specified device and a message similar to the following is displayed:
traceroute to 191.128.40.121, 30 hops max, 38 byte packets