The Power-up Sequence 31

7Slide the rack-mounting brackets on the sides of the Webcache into the rack-mounting rails.

8Secure the front of the Webcache to the rack with the captive thumbscrews, as shown in Figure 8.

Figure 8 Attaching the Webcache to the Rack

9

Ensure that the ventilation holes in the Webcache are not obstructed.

 

 

The Power-up

The following sections describe how to get your Webcache powered-up

Sequence

and ready for operation.

Powering-up the

Use the following sequence of steps to power-up the Webcache:

Webcache

 

1

Plug the power cord into the power socket at the rear of the Webcache.

2

Plug the other end of the power cord into your power outlet.

3

The Webcache automatically powers-up, which takes approximately

 

60-90 seconds. During power-up all of the LEDs light and the Power/Self

 

test LED flashes green. When the Webcache has powered-up and is

 

operating normally, the Power/Self test LED changes to non-flashing

 

green.