Displaying and Changing Security Information 121

 

If the device is accessible and functioning correctly, a message similar to

 

the following is displayed which displays the network hops:

 

1.routerc1 (140.204.20.20) 1.292ms, 1.343ms, 1.810ms

 

2.BW-RTR-4.EUR.3Com.COM (161.71.21.45) 26.027ms, 27.156ms,

 

44.902ms

 

3.BW-RTR-1.EUR.3Com.COM (140.204.220.15) 24.323ms, 24.854ms,

 

30.096ms

 

4.janeway (161.71.123.36) 27.303ms, 33.639ms

 

If the device is not accessible, or is not functioning correctly, a message

 

similar to the following is displayed:

 

No answer from 191.128.40.121

 

 

Displaying and

You can display and change the Security-related information for the

Changing Security

Webcache using the commands on the Security menu. These commands

Information

allow you to:

 

■ Specify the password for the current user

 

■ Enable and disable password recovery

Changing the Admin

You can change the password for the admin user using the password

Password

command on the Security menu.

 

To change the password, you need to login as the admin user and then

 

follow the steps below:

 

1 At the Top-level menu, enter:

 

security password

 

The following prompt is displayed, allowing you to enter a new

 

password:

 

Enter the password:

 

2 Enter the new password for the admin user.

 

The following prompt is displayed, allowing you to re-enter the new

 

password as confirmation:

 

Re-enter the password:

 

If you press Return without entering a password, the password is set to

 

<no password>.

 

3 A message is displayed informing you that the password has been

 

successfully changed.