Displaying and Changing Webcache Information and Functions 125

To set the community string:

1At the Top-level menu, enter:

system management community

The following prompt is displayed:

Enter new community for user ‘admin’[private]:

2Enter a community string for the admin user name.

Displaying Summary You can display the summary information for the Webcache using the Information summary command on the System menu. This information may be useful

for your technical support representative if you have a problem.

To display the information:

1At the Top-level menu, enter:

system summary

The administration details are displayed as shown in the example below:

3Com SuperStack 3

 

System Name

: Development

Location

: Wiring Closet, Floor 1

Contact

: System Administrator

Time Since Reset

: 2 days, 3 hours, 10 minutes

Software Version

: 1_00

Hardware Version

: 1.0

MAC Address

: 08:00:00:00:11:11

Serial Number

: 7ZNR001111

The following read-only fields are displayed:

■System Name

Displays the descriptive name, or system name, for the Webcache. For information about assigning a new name, see “Specifying a Webcache Name”on page 124.

■Location

Displays the physical location of the Webcache. For information about assigning a new location, see “Specifying Location Details” on page 124.