HP X1211AP, X1027AP, X1026AP, X1023AP Advanced Menu Continued, Select, To Do This, Troubleshooting

Troubleshooting

	Table 2-3
	Advanced Menu (Continued)
Select	To Do This

Device Options (continued)

■Change the parallel port mode from Enhanced Parallel Port (EPP, the default setting) to standard, bidirectional EPP, or Enhanced Capabilities Port (ECP).

■Set video-out mode to NTSC (default), PAL, NTSC-J, or PAL-M.*

■Enable/disable all settings in the SpeedStep window. (When Disable is selected, the notebook runs in Battery Optimized mode.)

■Specify how the notebook recognizes multiple identical port replicators that are identically equipped. Select Disable to recognize the port replicators as a single port replicator; select Enable to recognize the port replicators individually, by serial number.

■Enable/disable the reporting of the processor serial number by the processor to the software.

*Video modes vary even within regions. However, NTSC is common in North America; PAL, in Europe, Africa, and the Middle East; NTSC-J, in Japan; and PAL-M, in Brazil. Other South and Central American regions can use NTSC, PAL, or PAL-M.

2–6 Maintenance and Service Guide