HP X1052AP, X1027AP, X1026AP, X1023AP, X1020EA Lift the right side of the system board approximately

Models: X1078AP X1086AP X1062AP X1210AP X1042AP X1002US X1089AP X1028AP X1050US

1 186
Download 186 pages 7.59 Kb
Page 136
Image 136
4.Lift the right side of the system board approximately

Removal and Replacement Procedures

4.Lift the right side of the system board approximately

1 inch 1. If necessary, flex the back edge of the base enclosure out so that the parallel 2 and serial connectors 3 clear the base enclosure.

5.Slide the system board to the right at an angle 4.

6.Remove the system board.

Removing the System Board

Reverse the above procedure to install the system board.

5–46

Maintenance and Service Guide

Page 136
Image 136
HP X1052AP, X1027AP, X1026AP, X1023AP, X1020EA, X1018CL, X1012EA, X1012QV Lift the right side of the system board approximately