ButtonFunction

Guide

Opens the Television Guide.

Recorded TV Opens the Recorded TV window where all your recorded TV programs are stored. From this window, you can search for and play back a recorded show.

Standby button

The Standby button puts the computer into and out of a power-reduced state, called standby, which runs the computer with minimal power until you

give it a command. To take the computer out of standby, press the Standby button for at least 1 to 2 seconds on the remote control. It is recommended that you use this button when Media Center is closed.

An LED (light-emitting diode) located under the Standby button blinks when the remote control is transmitting a signal to the remote sensor.

n

Make sure you turn off the monitor and turn down or mute the volume; for example, if you have a scheduled recording in the middle of the night and don’t want to be disturbed.

The HP Digital Entertainment Center will not automatically go into standby mode if Media Center is open. It is best to close Media Center before you manually place the HP Digital Entertainment Center in standby mode.

24Microsoft Windows XP Media Center Edition 2005 Reference Guide