11Click Next.

12The Backup or Restore Wizard window shows the message You have created the following restore settings. In the window, click the Advanced button. Click Next.

13A warning message window opens. Click OK in the Warning window.

14Select Replace existing files and then click Next. Click Next again. Click Finish. The Restore Progress window opens.

15 Wait until the process completes, and then click Close in the Restore Progress window.

16 A Backup Utility message window opens. Click Yes to restart the HP Digital Entertainment Center. Wait until the restart completes.

Open Media Center and complete the setup. You can now play previously recorded TV programs that are broadcaster encrypted.

Using Two TV Tuner Cards

Recording

(Select models only)

Your HP Digital Entertainment Center can support two analog antennae (NTSE, PAL, or SECAM), two analog cables (no set-top box), two cable set-top boxes, or two satellite TV set-top boxes. You cannot set up the tuners to different TV signal sources, such as satellite and antenna. Both TV tuners must be connected to the same signal

source. For example, you must use an antenna, cable, two cable boxes, or two satellite set-top boxes for both tuner inputs.

With two TV tuners, your HP Digital Entertainment Center can record two programs at the same time. You can also watch live TV while recording a program on another channel.

Watching and TV Programs

Recording two programs at the same time

(Select models only)

1 Press the Media Center Start button on the remote control.

2Select My TV, and then select Guide.

3Use the arrow buttons to select a show to record, and then press the Record button on the remote control.

4Select a second show to record at the same time, and then press the Record button again.

5Follow any onscreen instructions.

Watching and Recording TV Programs 63