HTC PHAR100 user manual Charge the battery, To remove the battery, To charge the battery

Getting Started 25

To remove the battery

1.Make sure your device is turned off.

2. Remove the back cover.

3.Lift the bottom end of battery from

the compartment groove, then remove it.

Groove

Charge the battery

New batteries are shipped partially charged. Before you start using your device, it is recommended that you install and charge the battery. Some batteries perform best after several full charge/discharge cycles.

To charge the battery

1.Connect one end of the USB sync

cable to the sync connector on your device.

2. Connect the other end of the USB		2	3
	sync cable to the USB port of the
	AC adapter.	1
3.	Plug in the AC adapter to an
	electrical outlet to start charging
	the battery.
Notes	• The AC adapter may vary depending on the country or territory where
	you purchased the device.

•Only the AC adapter and USB sync cable provided with your device must be used to charge the device.

Charging is indicated by a solid amber light on the left LED indicator.

As the battery is being charged while the device’s power is on, a charging icon appears in the title bar of the Today screen. After the battery has been fully charged, the left LED charging indicator becomes green and a full

battery icon appears in the title bar of the Today screen.

Warning!	• Do not remove the battery from the device while you are charging it
	using the AC or car adapter.
	• As a safety precaution, the battery stops charging when it overheats.