HTC PHAR100 user manual Connections tab

Getting Started 47

Connections tab

Icon Description

Beam Set your device to receive incoming Bluetooth beams.

Bluetooth Turn Bluetooth on, set your device to visible mode, and scan for other Bluetooth devices.

Comm Manager Manage your device’s connections (including GPRS and Bluetooth), turn the phone on or off, and enable or disable the Direct Push function.

Connection Setup Configure your device’s data connections, such as GPRS, WAP, and MMS, based on the detected or selected network operator. See Chapter 10 for details.

Connections Set up one or more types of modem connections for your device, such as phone dial-up, GPRS, and more, so that your device can connect to the Internet or a private local network.

CSD Line Type Set the line type to use when making a circuit switch data (CSD) connection. Normally, you do not need to change the setting unless you encounter a problem on establishing a connection.

GPRS Setting Set the GPRS authentication method.

Network Cards Set up your device’s network card, if you installed one.

SMS Service Enables sending of SMS text messages via a data connection, such as GPRS or a circuit-switched connection.

USB to PC Set a USB serial connection between your device and PC when there are problems connecting ActiveSync.