Huawei WS322 manual Function, Operation

WS322 300Mbps Wireless Router
User Guide			1 Product Overview
Reset button		After the WS322 is powered on, press and hold the Reset
		button for 6s or more to restore the WS322 to its factory
		settings.
		Restoring the WS322 to its factory settings will erase your
		user-defined data.
Status indicator		Shows the WS322 working status. For details, see section
		1.2.2 Indicators.
Signal strength		Shows the network signal strength. For details, see section
indicator		1.2.2 Indicators.
ETH port		Connects the WS322 to a network device.
Table 1-2Using the WPS Button for Quick Configuration
Function	Operation
WPS	Press and hold the WPS button more than 1 second and less than
connection	3 seconds, and press the wireless client's WPS button within 2
	minutes.
	When the		status indicator turns from blinking to steady on,
	the connection is set up.
Switching the	Press and hold the WPS button until:
working mode
	the		indicator starts blinking to switch to WiFi Router
	mode.
	the		indicator starts blinking to switch to WiFi Client
	mode.
	the		indicator starts blinking to switch to WiFi
	Repeater mode.

1-3