Tools

Table 4 lists the tools required to install and point the antenna.

Table 4: Tools required to install and point the antenna

Tool

Details

(2) 7/16-inch

For ¼-inch bolts. Some nuts and bolts require a second wrench

combination wrenches *

to prevent turning.

 

 

(2) ½-inch combination

For 5/16-inch bolts. Two of the canister nuts are not accessible

wrenches *

with a socket wrench. Some nuts and bolts require a second

 

wrench to prevent turning.

 

 

Torque wrench

With ½-inch and 7/16-inch sockets capable of torquing to 15 ft-lb.

 

 

M7 hex key

For J-type radio.

 

 

7/64-inch hex key

For cradle-type radio. The 7/64-inch hex key is included in the

 

antenna kit.

 

 

Long-shaft hexagonal

For socket-head cap screws (Allen screws) with a 3-mm

ball driver, 3-mm

hexagonal socket. Driver shaft should be at least 5 inches long.

 

(Recommended for attaching or removing the J-type radio

 

assembly to or from the waveguide transition. A short-arm hex

 

key is provided with the screws, but the long-shaft ball driver is

 

much easier. The long-shaft ball driver cannot be used for the

 

cradle-type radio.)

 

 

Torque wrench for

Must fit a 3-mm hexagonal socket and be capable of torquing to

hexagonal socket

15 inch-lb.

 

 

Bubble level

Used to make sure the mast is plumb.

 

 

Compass

Hand-held, magnetic.

 

 

Pencil

Carpenter’s pencil.

 

 

Outdoor pointing

Optional. Hughes P/N 1031393-0002. Portable repeater that

interface (OPI)

displays signal strength values during antenna pointing. For

 

additional information, see Installing the OPI on page 58.

 

 

Ladder

If needed.

 

 

*A socket wrench with 7/16-inch and ½-inch sockets makes some tasks easier, but for some nuts or bolts there is not enough clearance to use a socket wrench.

See the HN System Antenna Site Preparation and Mount Installation Guide (1035678-0001) for a more complete list of tools and items that may be needed for installation.

Table 5 specifies the correct tool size for each hardware size included in the antenna kit:

Table 5: Tool sizes matched to hardware sizes

Hardware size

Tool size

¼-inch

7/16-inch

 

 

5/16-inch

½-inch

 

 

#6-32 socket-head cap screw

7/64-inch hex key

 

 

M4 x 20 mm screw

M7 key wrench

 

 

20

Chapter 2 • Antenna parts and required tools 1037312-0001 Revision A

Page 37 Page 39
Page 38
Image 38
Hughes AN6-098P installation manual Tools, Lists the tools required to install and point the antenna
Page 37 Page 39

AN6-098P specifications

The Hughes AN6-098P is a sophisticated portable satellite communications terminal designed to provide high-capacity, secure, and reliable communication capabilities in various environments. This advanced system is an embodiment of cutting-edge technology, specifically catered for military and government use, ensuring that users can connect seamlessly, no matter the circumstances.

One of the standout features of the AN6-098P is its compact design. Weighing significantly less than traditional satellite systems, it can be easily transported and deployed in a matter of minutes. This portability does not compromise performance; rather, it enhances the system's versatility, allowing it to be utilized in remote locations, disaster recovery operations, and on-the-go military missions.

The AN6-098P incorporates advanced modulation technologies that ensure efficient bandwidth utilization. The system supports multiple frequency bands, including Ku-band and Ka-band, enabling it to connect to various satellites, each providing distinct advantages in terms of coverage and data rates. With high data throughput capabilities, users can transfer large volumes of data, stream high-definition video, or engage in high-speed internet browsing without interruptions.

In terms of security, the Hughes AN6-098P employs robust encryption and secure protocols, essential for sensitive communications in military operations. This ensures that the transmission remains confidential and is safeguarded from potential eavesdropping or cyber threats. The system also supports interoperability with other communication systems, facilitating seamless integration within existing military infrastructures.

User-friendliness is a significant characteristic of the AN6-098P. Its intuitive interface allows users to quickly set up and manage connections, even in high-pressure situations. Training requirements for personnel are minimal, which is crucial for rapid deployment scenarios.

Durability is another key aspect of the Hughes AN6-098P. Built to withstand harsh environmental conditions, including extreme temperatures and rugged terrain, this system can operate reliably in adverse situations. It is engineered to meet stringent military standards, ensuring that it performs consistently when it matters most.

In conclusion, the Hughes AN6-098P is a highly capable and innovative satellite communications terminal that marries portability, security, and high performance. Its state-of-the-art technology and versatile design make it an invaluable asset for military and government communication, ensuring that vital information can be shared anywhere and at any time.
Top Page Image Contents